Guide

Got an Abuse Report? How to Find the VPS Behind It

An abuse report gives you an address and a time. How to trace it to the VPS and customer behind it, what to reply, and how to answer in minutes instead of hours.

By Frabs · 15 November 2026 · 3 min read

The short answer: take the address and time from the report, find which VPS holds that address on which node, check what it was sending at that time, act on it, and reply to the reporter with what you found and what you did. The slow part is usually the first step, so keep a record that ties addresses to VPS's and keep traffic history for each one.

Read the Report Properly

Before you search for anything, pull out:

  • The address. Sometimes with a port, which tells you what kind of traffic it was.
  • The time, and its time zone. Reports come from all over the world. Convert the time to your own servers' time before comparing.
  • What happened. Port scanning, login attempts, spam or a flood each leave different traces.
  • Any evidence attached. Log lines from the reporter often show the exact ports and timing.

If the report is in the common X-ARF or plain-text formats, the abuse report generator shows what a complete one looks like.

Find the VPS

Your billing system or IPAM should say which VPS the address is assigned to. If it does not, or you need to check, find it on the node.

On a KVM node run by libvirt, list a guest's interfaces and MAC addresses:

Shell
virsh domiflist <guest>

To find which guest is using an address right now, look it up in the neighbour table on the node, then match the MAC address to a guest:

Shell
ip neigh | grep 203.0.113.42

On Proxmox, the guest's network config holds its MAC address:

Shell
qm config <vmid> | grep ^net

Be careful with addresses that move between guests. If a VPS was reinstalled or an address reassigned after the report, the current holder may not be the one who sent the traffic.

Check What It Was Sending

If the abuse is still going on, you can see it live. Watch the guest's interface on the node:

Shell
tcpdump -ni <tap-or-vnet-interface> -c 200

Scanning shows connections to one port across many hosts. Brute force shows repeated connections to login ports. Spam shows many connections to port 25.

If it has stopped, you need history: traffic counts per VPS around the time in the report. Without it, you can only guess.

Act, Then Reply

Stop the abuse first: limit or suspend the VPS, and tell the customer. A compromised VPS is common, and the customer may not know. Then reply to the reporter with:

  1. That you received the report and found the source.
  2. What you did about it.
  3. That you will act again if it comes back.

A short, prompt reply keeps a single report from becoming a range listing. Unanswered reports are what make upstreams and list operators treat a network as careless.

How Frabs Makes This Quick

With Frabs Hypervisor, search any address in the panel and Frabs shows the VPS that holds it, any incident from that VPS and, with your billing system connected, the customer behind it. If it was abusing, Frabs has usually caught it already: named the VPS, limited it by your rules and kept the evidence, while the other VPS's on the node carried on.

Choose Download Report on the incident for a PDF with the graphs, readings and timeline, ready to attach to your reply. It leaves out your other customers. If you connect a billing system or help desk, Frabs can also open a ticket for the customer with the same evidence. The live demo shows a sample incident.

Frequently Asked Questions

How do I find which VPS an IP address belongs to?

Check your billing system or IPAM first. On the node, ip neigh shows the MAC address using the address, which you can match to a guest with virsh domiflist on libvirt or qm config on Proxmox.

What should I reply to an abuse report?

Confirm you received it and found the source, say what you did, and say you will act again if it returns. A short, prompt reply matters more than a long one.

What if the abuse has already stopped?

You need traffic history for each VPS around the time in the report. Without it, it is hard to prove which VPS sent the traffic.

Can Frabs create a report to send back?

Yes. Download Report on an incident gives a PDF with the graphs, readings and timeline, leaving out your other customers.

Earn 30% recommending Frabs

Share your own code. Your customers get 20% off their first month, and you earn 30% of every payment for them, for as long as they keep them. Paid by PayPal.

Become an Affiliate

Start with One Server, Free