Guide

IP Range Blacklisted? How One Abusive VPS Causes It and How to Fix It

One compromised VPS can get a whole range blacklisted or null-routed. How to find the source, get delisted, and stop it happening again.

By Frabs · 1 November 2026 · 5 min read

The short answer: when an IP range gets blacklisted, the cause is usually one compromised or abusive server sending spam, scans or floods. Fix that source first, because a delisting request sent while the abuse continues will fail or be undone. Then request removal from each list, and put monitoring in place so the next one is caught before a list sees it.

If you run a hosting network, this is one of the most expensive problems you can have, because the customers who pay for it are not the ones who caused it.

How One VPS Gets a Whole Range Listed

Most outbound abuse does not come from customers who set out to cause trouble. It comes from a VPS with a weak password, an unpatched web application or an exposed service. An attacker takes it over and starts using it to send spam, scan the internet, brute force logins or join a flood.

Blocklists are built to protect the people receiving that traffic, so some of them list more than the single address. If abuse keeps coming from several addresses, or a list operator decides a network is not acting on reports, the listing can widen to cover a larger block. Every customer in that block then has a problem they did nothing to cause, usually starting with mail that no longer arrives.

Floods bring a second risk. When a flood leaving your network reaches an upstream provider, they may stop it by null-routing the addresses involved, often using remote triggered blackholing. Depending on how wide that route is, other customers can go offline with it.

How to Check Whether Your Range Is Listed

Start with the addresses people have reported, then check a sample across the rest of the range. Our free IP blacklist check tests an address against the common lists. Check more than one address, because a listing on a single IP and a listing on the whole range need different responses.

Also read your abuse mailbox. Reports from upstreams and list operators usually arrive there first, and often include the time and type of traffic that started it. If you send mail from the range, Microsoft's Smart Network Data Services can show how your addresses look from their side.

How to Find the VPS Causing It

An abuse report tends to give you an address and a time, so the first job is to tie that to a guest. On the node, find which interface carries the address, then look at what it is sending right now.

To list a guest's interfaces on a KVM node run by libvirt:

Shell
virsh domiflist <guest>

To watch live traffic on that interface and see whether it is sending mail:

Shell
tcpdump -ni <interface> -c 200 'tcp dst port 25'

To see packet rates on every interface at once, which quickly shows the guest that stands out:

Shell
sar -n DEV 1 5

Look for these patterns:

  • Spam: many outbound connections to port 25 on many different hosts.
  • Scanning: connections to one port across a large number of hosts, most of them unanswered.
  • Brute force: repeated connections to login ports such as 22 or 3389 on many targets.
  • Flooding: a very high packet rate towards one or a few targets, often UDP or SYN packets.

If the abuse has already stopped, you are left with whatever history you kept. This is why per-guest traffic history matters: without it, you may never find out which VPS it was.

How to Get Delisted

Each list has its own process, so read the listing's own page first and follow what it says. A few things hold almost everywhere:

  1. Stop the abuse before you ask. Limit or suspend the VPS, then work with the customer to clean it up. A compromised server can hold hidden access, so a rebuild from clean images is often safer than removing what you can see.
  2. Read which list and which listing you have. On Spamhaus, for example, the SBL, the XBL and the PBL mean different things and are handled differently. The PBL is a policy list rather than a penalty, while an SBL listing is normally dealt with by the network responsible for the addresses.
  3. Say what you did. A short, specific note about what happened and what you changed helps far more than a request to be removed.
  4. Never pay for removal. Reputable lists do not charge for it. Treat any offer to remove a listing for a fee with suspicion.

How to Stop It Happening Again

Delisting fixes the symptom. These steps reduce how often you go through it again:

  • Restrict outbound port 25 by default. Many providers open it on request for customers who really run mail. Most spam from a compromised VPS then never leaves.
  • Set reverse DNS and keep abuse contacts current. Lists and upstreams need to be able to reach you quickly, and a fast reply can be the difference between a warning and a wider listing.
  • Act on abuse reports quickly. Unanswered reports are often what turns a single listing into a range listing.
  • Watch outbound traffic per VPS, all the time. A list can only react to abuse it has already seen. You can see it on your own node first, which gives you a chance to act before anything is reported.

Where Frabs Fits

Frabs Hypervisor runs one sensor on each node and watches the traffic leaving every VPS, with nothing installed inside the guests. When a VPS starts sending spam, scans or floods, it names the VPS and the customer, limits that one source by the rules you set, and keeps the evidence, so its neighbours carry on and you are not left searching through logs. If you want to see what that looks like, the live demo runs on sample nodes.

Frequently Asked Questions

Why did my whole IP range get blacklisted when only one VPS was sending spam?

Some blocklists list more than one address when abuse keeps coming from a network, or when reports go unanswered. A listing can then cover a wider block, which affects customers who did nothing wrong.

How long does a blacklist listing last?

It depends on the list and the listing. Some expire by themselves some time after the abuse stops, and others need a removal request. Check the listing's own page, and make sure the abuse has really stopped first.

Does it cost money to get removed from a blacklist?

Reputable blocklists do not charge for removal. Be wary of anyone offering to remove a listing for a fee.

Should I block outbound port 25 on my VPS's?

Blocking it by default and opening it on request is a common approach for hosting providers. It stops most spam from a compromised VPS before it leaves your network, while customers who really run mail can still ask for it.

Earn 30% recommending Frabs

Share your own code. Your customers get 20% off their first month, and you earn 30% of every payment for them, for as long as they keep them. Paid by PayPal.

Become an Affiliate

Start with One Server, Free